10~500HZ，2G10min/1cycle，period for 60 minutes，each axes
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC
Compliance to UL60950-1,TUV EN60950-1,GB4943
Compliance to EN55022(CISPR22)Class B，GB9254 Class B,EN55014,EN61000-3-2,3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61000-6-1
≥580K hrs min. MIL-HDBK-217F(25℃)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4.Line regulation is measured from low line to high line at rated load.
5.Load regulation is measured from 0% to 100% rated load
6.The ambient temperature derating of 5℃/1000 m is needed for operating altitude greater than 2000m(6500ft)
7.The power supply is considered as a component which will be installed into a finalequipment.The final equipment must be re-confirmed that it still meets EMC directives.For guidance on how to perform these EMC tests.